Aetria Network Manager

Aetria Network Manager is pre-configured with Aetria Command Center and is fully compatible with Aetria Workstation, Arqa and Aligo.

Aetria Network Manager Specifications

Processor: Xeon CPU-2224 3.4GHz

Memory: 8GB 2666MT/s DDR4 ECC UDIM

Storage: 1TB 7.2K RPM SATA 6Gbps 512n 3.5in Hot-plug HDD

Supported System: Datapath Aetria Network Manager & Command Center

Supported OS: Windows 10, Linux

Browser Access: Safari, Edge, Chrome

Security: HTTPS, TLS, TPM1.2/2.0, SecureBoot, Cryptographically signed firmware. Silicon root of trust.

Ethernet: 2x100/1000Mbps full/half duplex

I/O & Ports: 1 x front panel USB 2.0, 2 x USB 3.0 real panel, 1x IDRAC, VGA, serial connector

Power Supply: Dual hot plug redundant PSU 350W

Chassis Dimensions: Width: 434mm, Depth: 595mm

Form Factor: 1U Rackmount

Weight: 13.6 KG

Environmental Temperature: -40 ºC to 65 ºC

Environmental Humidity: 5-95% with 33 ºC dew point, non-condensing

Environmental Shock: Six consecutively executed pulses in positive and negative x,y,z planes each side of the system of 71G for up to 2ms

Environmental Vibration: 1.88 Grms @10-500Hz for 15min

Operating Temperature: 10-35 degC continuous operation (up to 950m above sea level)

Operating Humidity: 10-80% RH with 29 ºC dew point, non-condensing

Operating Shock: One pulse each side of the system of 71G for up to 2ms

Operating Vibration: 1.88 Grms @10-500Hz for 15min

Noise Level: Max 38 dB(A)

Compliance: CE, CB, UL, EAC, CCC, BIS, FCC